Change Log Firmware

v2.6.7

Display the angle difference in imprecision warning
In Basic mode when LRUD is activated in settings, it will be displayed at the end of each station
The section name in Verbose mode is checked for uniqueness
Change distance display format when distance >100ft or m
Using MNemo given name instead of fixed SSID for Wifi(AP) name
Text display optimization
Fixed bug in Map display mode that could lead to device lock.

Completed settings available on the webpage of the MNemo. Date/Time can now be synchronized through a web browser.
Units get displayed for depth length and azimuth readings
Added moving arrow progress indicator option instead of blinking background. Option available in Setting menu.
Improvement of UI display, flickering and dirty pixels removed.
Optional address parameter for command "getdata" allowing to read MNemos memory after reset.
LRUD for survey OUT is now recorded at WHITE phase of station IN

Added 2 new click sequences, active during "Stand By", to set survey direction in BASIC mode. LEFT-LEFT-LEFT-LEFT for IN survey and RIGHT-RIGHT-RIGHT-RIGHT for OUT survey.
During the Stand By screen a index of the click combination is displayed.
In basic mode Naming of section is now incremental ( B01,B02 etc ), counter gets reset when memory is.
The name of the section as well as the direction get displayed beneath the shot counter

Add a marker with a unique ID to a station in basic mode by using a combination of clicks: LEFT-LEFT-LEFT-RIGHT
Marker number gets displayed on live and history map
Live survey map can be displayed in BASIC mode using a combination of clicks: LEFT-RIGHT-LEFT-RIGHT
You can access the LRUD entry mode in BASIC mode using a combination of clicks: RIGHT-RIGHT-RIGHT-LEFT
Added statistics page in history section after displaying the map
In settings there's a new option to use Icons instead of text for BASIC survey indications
In settings there's a new option to adjust the contrast of the display.
Menu simplified for water type, unit and survey mode settings. All testing and debugging mode are now regrouped in Test Mode.
Bold font used in BASIC mode to increase readability.
BASIC mode input progress bar optimized to show smoother progress.
Bug Fix: the device would enter sleep mode in Verbose survey, this could lead to DMP corruption (no data loss)
Bug Fix: Update was missing from Menu

Battery voltage display has been replaced by a percentage of charge available.
On the main menu voltage gets displayed in red when <20% ( +/- 40 min of survey left)
During survey an icon is displayed in BASIC and VERBOSE survey mode indicating low battery ( <20%)
When battery reaches 0% the device is safely shutdown avoiding memory corruption that could occur if this happened during the survey phase.
Improvement in the Extra>Test mode, more data displayed and possibility to adjust parameter live with CLI in this mode.

Feature update:

Bug Fixes:

Fix issue where double tap light threshold was reset
Pressure sensor change gets now saved after change
Fixed display pixelization on startup
When last shot is erased in Verbose mode it gets now also erased from current map
Allow lower values of click threshold than 20
Progress bar no longer erases shot number in verbose mode

Added interface to save values for LRUD (Left-Right-Up-Down) profile measured or estimated values. This feature is available in Verbose survey mode only for the moment.
Fixed issue in Double Tap activated map display.
When in and out azimuth difference is bigger than 5deg an icon will indicate it.
Added display of Wi-Fi connection quality on main screen. Wi-Fi auto turn off after 5 min of inactivity.
Added Setting page to webserver allowing to adjust most MNemo settings through the Wi-Fi interface.
Text display uses now anti antialiased fonts.

Added Warning icon on display when magnetic interference detected
Record temperature and time at each station.
Increased size of font in the menu of the Verbose survey mode
Added CSV file download to the webserver
Added individual Section CSV download link on the main webpage
Check for valid date at start
When wheel mode (WM) is different than 0, reverse direction functionality is disabled
Fixed bug in display when depth >100

Added CLI command to activate/deactivate the requirement to move the cursor right to turn on the MNemo: activatesafeon / deactivatesafeon
Added message indicating that parameters have been updated with the firmware

Changed BASIC mode display, added display of station number and color change on whole screen.
Added setting to deactivate double tap map display. Accessible through CLI: activatedoubletap/deactivatedoubletap
Added setting to control length of click in BASIC mode. Accessible through CLI: setBMclickfactor factor (factor between 20% and 150%).
Support for BNO085 as secondary compass.
Fixed bug when SSID or wifi password contain whitespace character.
Fixed bug in month settings

Last modified: 03 December 2024