Skip to main content

Switching JedEye ON

There's no ON/OFF switch on the device. You'll switch the device ON using the slider control described in the previous section.

  • Move the slider control upwards and hold it there until a confirmation message appears. At that moment move the slider downwards and the device will turn on displaying a splash screen and the firmware version.

screencap_2025-12-29_15-46-30.png

Tip: You have around 4s to validate the ON command. If not done on time the device will turn off again. This procedure is useful to avoid unwanted switch on during transport.

  • When this appears, it means JedEye has booted properly, and all the sensors are working. Move again the slider upwards and you’ll be in the main menu.

screencap_2025-12-29_15-46-52.png

Tip: You can deactivate this safety mechansim in OPTIONS >SETTINGS> DEVICE SETTINGS > SAFEON.